M.A.D SPINNER COWLS
|
|
The Mad Spinner cowl is a British made revolving chimney cowl designed to eradicate downdraught, whilst the rotating action assists ventilation. Being made at our factory in the UK allows us to fully control the manufacture of this very technical cowl, whilst ensuring only prime materials are used in the production process. This painted finish prevents reflections being transferred to neighbouring buildings, whilst the product is rotating.
|
The base of the spinner cowl is made from die cast aluminium with a strong cross section to give support and strength to the rotating spinner. The fins are made from stainless steel and are spot woven into place and then spot-welded giving extra strength during rotation.
- Stainless steel construction witn a die cast aluminium base
- Fits a range of flue sizes up to 250mm
- Withstands flue temperatures up to 200°C
- Sold fully assembled and ready to fit
- Sold complete with a stainless steel strap fixing
- Has a test certificate to BSEN 1856-1: 2003
- Highly effective in preventing downdraught and increasing ventilation
- Height 320mm - Width 300mm
- Suitable for all fuel types
- Withstands wind speeds up to 50mph
- Bearings immersed in an oil bath to provide superior lubrication
In order to function properly the spinner should be removed and thoroughly cleaned at least once a year to remove any debris build up. Do not allow any cleaning agents to get onto the centre spindle. Our recommendation is that the product is sent back to our workshop for service annually to ensure longevity of use especially where coal, wood or smokeless fuel has been used.
IF POOR QUALITY FUEL OR UNSEASONED WOOD IS BURNT WHILST USING THIS PRODUCT, IT WILL STOP SPINNING.
FLUE PIPE ADAPTORS AVAILABLE WHEN FITTING A SPINNER COWL TO A FLUE PIPE.
| M.A.D Spinner Cowl Terracotta Strap Fix | £130.00 + VAT | More Info |